Fleetwide Interface Fatigue Load Prediction of an Operational Offshore Wind Farm Using a Single Accelerometer and SCADA Data

FRANCISCO DE N. SANTOS, NYMFA NOPPE, WOUT WEIJTJENS, CHRISTOF DEVRIENDT

Abstract


The operational life of offshore wind turbines is in part driven by the fatigue life of key structural components, such as the substructure. In recent years, fatigue life management of operational assets has become evermore important, as older farms are closing on their design lifetime and newer farms are designed with tighter margins. To support decisions on fatigue lifetime, it is advantageous to monitor the fatigue progression in these structures through SHM. However, a full instrumentation of every asset in a farm to assess the fatigue life of the substructure is considered economically infeasible. The drive for SHM in wind has been accompanied by the increased availability of intelligent data-driven methodologies which have attempted to provide the same information without the need for additional hardware. One such cost-effective approach, as described in [1], uses the available supervisory control and data acquisition (SCADA) systems, coupled with acceleration measurements to predict the fatigue life of an offshore wind turbine. The use of acceleration measurement data has been proven critical for capturing the complex dynamics of offshore wind turbines. In this contribution, we present the results of said data-driven approach using SCADA and Internet of Things (IoT) accelerometer installed at nacelle-level to monitor the fatigue life for the entirety of a real-world offshore wind farm comprised of 23 turbines, with a specific focus on long-term damage equivalent fatigue loads (DEL) estimation [2]. The availability of acceleration measurements for all locations in particular, is fundamental, as to cover all possible differences in natural frequencies between turbines would be nearly impossible if solely relying on wave and tidal data. To achieve this goal, a neural network architecture is used, enhanced by physics-informed learning focused on long-term estimation, trained and validated on so-called fleet-leader (three turbines instrumented with strain gauges, which provide the ground truth). In this study, we pay special attention to the farm-wide validation, cross-validation and extrapolation of these models as well as the performance for different operational conditions. Finally, this study is undertook for a real-world instrumentation setup, unparalleled in its scale, and can thus be indicative of future trends for SHM in offshore wind: farm-wide instrumentation and monitoring of structural health based on acceleration measurements, enabling a greater trustworthiness on reliability and durability estimation over the serviceable lifetime.


DOI
10.12783/shm2023/37041

Full Text:

PDF

Refbacks

  • There are currently no refbacks.