Open Access Open Access  Restricted Access Subscription Access

Carbon Nanotube (CNT) Enhancements for Aerosurface State Awareness1807

S. S. KESSLER, C. T. DUNN, S. S. WICKS, R. GUZMAN DE VILLORIA, B. L. WARDLE

Abstract


The goal of the present effort was to develop an integrated system capable of reliable ice-detection, de-icing and anti-icing in addition to structural diagnostics to enable aerosurface state awareness. The basis for the system is nanoengineered structured carbon nanotube (CNT) enhancements that can either be embedded within the composite laminates during manufacturing, or applied as a separate surface layer in a secondary process. The aligned CNTs are sufficiently long (20- 30 um) to span interply matrix regions, acting as mechanical reinforcement in addition to improving electrical conductivity by a factor of more than a million. Optimized electrode patterns are applied to the CNT-enhanced structure, and hardware provides closed-loop feedback control. Ice-detection is based on effective heat capacity, where power is applied to CNT-enhanced laminates (termed fuzzy fiber reinforced plastic, or FFRP) for seconds, and the slope of the temperature rise can be correlated to the thickness of ice present. For de-icing (melting) and antiicing (prevention of ice formation) a resistive heating principal is used. Voltage is applied to the FFRP material, which heats rapidly due to the small but finite resistance imparted by the CNTs. Structural diagnostics is achieved by monitoring and mapping changes in electrical resistance across electrode grid paths.

Full Text:

PDF